comparison: src/server/plugins/postgresql/test/pg/postgresql.conf
src/server/plugins/postgresql/test/pg/postgresql.conf
- changeset 385
- a1f4cb076d2f
- parent 287
- a171da778817
equal
deleted
inserted
replaced
| 210:21274e5950af | 385:a1f4cb076d2f |
|---|---|
| 1 # ----------------------------- | |
| 2 # PostgreSQL configuration file | |
| 3 # ----------------------------- | |
| 4 # | |
| 5 # This file consists of lines of the form: | |
| 6 # | |
| 7 # name = value | |
| 8 # | |
| 9 # (The "=" is optional.) Whitespace may be used. Comments are introduced with | |
| 10 # "#" anywhere on a line. The complete list of parameter names and allowed | |
| 11 # values can be found in the PostgreSQL documentation. | |
| 12 # | |
| 13 # The commented-out settings shown in this file represent the default values. | |
| 14 # Re-commenting a setting is NOT sufficient to revert it to the default value; | |
| 15 # you need to reload the server. | |
| 16 # | |
| 17 # This file is read on server startup and when the server receives a SIGHUP | |
| 18 # signal. If you edit the file on a running system, you have to SIGHUP the | |
| 19 # server for the changes to take effect, run "pg_ctl reload", or execute | |
| 20 # "SELECT pg_reload_conf()". Some parameters, which are marked below, | |
| 21 # require a server shutdown and restart to take effect. | |
| 22 # | |
| 23 # Any parameter can also be given as a command-line option to the server, e.g., | |
| 24 # "postgres -c log_connections=on". Some parameters can be changed at run time | |
| 25 # with the "SET" SQL command. | |
| 26 # | |
| 27 # Memory units: B = bytes Time units: us = microseconds | |
| 28 # kB = kilobytes ms = milliseconds | |
| 29 # MB = megabytes s = seconds | |
| 30 # GB = gigabytes min = minutes | |
| 31 # TB = terabytes h = hours | |
| 32 # d = days | |
| 33 | |
| 34 | |
| 35 #------------------------------------------------------------------------------ | |
| 36 # FILE LOCATIONS | |
| 37 #------------------------------------------------------------------------------ | |
| 38 | |
| 39 # The default values of these variables are driven from the -D command-line | |
| 40 # option or PGDATA environment variable, represented here as ConfigDir. | |
| 41 | |
| 42 #data_directory = 'ConfigDir' # use data in another directory | |
| 43 # (change requires restart) | |
| 44 #hba_file = 'ConfigDir/pg_hba.conf' # host-based authentication file | |
| 45 # (change requires restart) | |
| 46 #ident_file = 'ConfigDir/pg_ident.conf' # ident configuration file | |
| 47 # (change requires restart) | |
| 48 | |
| 49 # If external_pid_file is not explicitly set, no extra PID file is written. | |
| 50 #external_pid_file = '' # write an extra PID file | |
| 51 # (change requires restart) | |
| 52 | |
| 53 | |
| 54 #------------------------------------------------------------------------------ | |
| 55 # CONNECTIONS AND AUTHENTICATION | |
| 56 #------------------------------------------------------------------------------ | |
| 57 | |
| 58 # - Connection Settings - | |
| 59 | |
| 60 unix_socket_directories = 'run' | |
| 61 | |
| 62 # Disable TCP for testing | |
| 63 listen_addresses = '' | |
| 64 | |
| 65 | |
| 66 #listen_addresses = 'localhost' # what IP address(es) to listen on; | |
| 67 # comma-separated list of addresses; | |
| 68 # defaults to 'localhost'; use '*' for all | |
| 69 # (change requires restart) | |
| 70 #port = 5432 # (change requires restart) | |
| 71 max_connections = 100 # (change requires restart) | |
| 72 #superuser_reserved_connections = 3 # (change requires restart) | |
| 73 #unix_socket_directories = '/tmp' # comma-separated list of directories | |
| 74 # (change requires restart) | |
| 75 #unix_socket_group = '' # (change requires restart) | |
| 76 #unix_socket_permissions = 0777 # begin with 0 to use octal notation | |
| 77 # (change requires restart) | |
| 78 #bonjour = off # advertise server via Bonjour | |
| 79 # (change requires restart) | |
| 80 #bonjour_name = '' # defaults to the computer name | |
| 81 # (change requires restart) | |
| 82 | |
| 83 # - TCP settings - | |
| 84 # see "man tcp" for details | |
| 85 | |
| 86 #tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds; | |
| 87 # 0 selects the system default | |
| 88 #tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds; | |
| 89 # 0 selects the system default | |
| 90 #tcp_keepalives_count = 0 # TCP_KEEPCNT; | |
| 91 # 0 selects the system default | |
| 92 #tcp_user_timeout = 0 # TCP_USER_TIMEOUT, in milliseconds; | |
| 93 # 0 selects the system default | |
| 94 | |
| 95 #client_connection_check_interval = 0 # time between checks for client | |
| 96 # disconnection while running queries; | |
| 97 # 0 for never | |
| 98 | |
| 99 # - Authentication - | |
| 100 | |
| 101 #authentication_timeout = 1min # 1s-600s | |
| 102 #password_encryption = scram-sha-256 # scram-sha-256 or md5 | |
| 103 #db_user_namespace = off | |
| 104 | |
| 105 # GSSAPI using Kerberos | |
| 106 #krb_server_keyfile = 'FILE:${sysconfdir}/krb5.keytab' | |
| 107 #krb_caseins_users = off | |
| 108 | |
| 109 # - SSL - | |
| 110 | |
| 111 #ssl = off | |
| 112 #ssl_ca_file = '' | |
| 113 #ssl_cert_file = 'server.crt' | |
| 114 #ssl_crl_file = '' | |
| 115 #ssl_crl_dir = '' | |
| 116 #ssl_key_file = 'server.key' | |
| 117 #ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers | |
| 118 #ssl_prefer_server_ciphers = on | |
| 119 #ssl_ecdh_curve = 'prime256v1' | |
| 120 #ssl_min_protocol_version = 'TLSv1.2' | |
| 121 #ssl_max_protocol_version = '' | |
| 122 #ssl_dh_params_file = '' | |
| 123 #ssl_passphrase_command = '' | |
| 124 #ssl_passphrase_command_supports_reload = off | |
| 125 | |
| 126 | |
| 127 #------------------------------------------------------------------------------ | |
| 128 # RESOURCE USAGE (except WAL) | |
| 129 #------------------------------------------------------------------------------ | |
| 130 | |
| 131 # - Memory - | |
| 132 | |
| 133 shared_buffers = 128MB # min 128kB | |
| 134 # (change requires restart) | |
| 135 #huge_pages = try # on, off, or try | |
| 136 # (change requires restart) | |
| 137 #huge_page_size = 0 # zero for system default | |
| 138 # (change requires restart) | |
| 139 #temp_buffers = 8MB # min 800kB | |
| 140 #max_prepared_transactions = 0 # zero disables the feature | |
| 141 # (change requires restart) | |
| 142 # Caution: it is not advisable to set max_prepared_transactions nonzero unless | |
| 143 # you actively intend to use prepared transactions. | |
| 144 #work_mem = 4MB # min 64kB | |
| 145 #hash_mem_multiplier = 1.0 # 1-1000.0 multiplier on hash table work_mem | |
| 146 #maintenance_work_mem = 64MB # min 1MB | |
| 147 #autovacuum_work_mem = -1 # min 1MB, or -1 to use maintenance_work_mem | |
| 148 #logical_decoding_work_mem = 64MB # min 64kB | |
| 149 #max_stack_depth = 2MB # min 100kB | |
| 150 #shared_memory_type = mmap # the default is the first option | |
| 151 # supported by the operating system: | |
| 152 # mmap | |
| 153 # sysv | |
| 154 # windows | |
| 155 # (change requires restart) | |
| 156 dynamic_shared_memory_type = posix # the default is the first option | |
| 157 # supported by the operating system: | |
| 158 # posix | |
| 159 # sysv | |
| 160 # windows | |
| 161 # mmap | |
| 162 # (change requires restart) | |
| 163 #min_dynamic_shared_memory = 0MB # (change requires restart) | |
| 164 | |
| 165 # - Disk - | |
| 166 | |
| 167 #temp_file_limit = -1 # limits per-process temp file space | |
| 168 # in kilobytes, or -1 for no limit | |
| 169 | |
| 170 # - Kernel Resources - | |
| 171 | |
| 172 #max_files_per_process = 1000 # min 64 | |
| 173 # (change requires restart) | |
| 174 | |
| 175 # - Cost-Based Vacuum Delay - | |
| 176 | |
| 177 #vacuum_cost_delay = 0 # 0-100 milliseconds (0 disables) | |
| 178 #vacuum_cost_page_hit = 1 # 0-10000 credits | |
| 179 #vacuum_cost_page_miss = 2 # 0-10000 credits | |
| 180 #vacuum_cost_page_dirty = 20 # 0-10000 credits | |
| 181 #vacuum_cost_limit = 200 # 1-10000 credits | |
| 182 | |
| 183 # - Background Writer - | |
| 184 | |
| 185 #bgwriter_delay = 200ms # 10-10000ms between rounds | |
| 186 #bgwriter_lru_maxpages = 100 # max buffers written/round, 0 disables | |
| 187 #bgwriter_lru_multiplier = 2.0 # 0-10.0 multiplier on buffers scanned/round | |
| 188 #bgwriter_flush_after = 0 # measured in pages, 0 disables | |
| 189 | |
| 190 # - Asynchronous Behavior - | |
| 191 | |
| 192 #backend_flush_after = 0 # measured in pages, 0 disables | |
| 193 #effective_io_concurrency = 1 # 1-1000; 0 disables prefetching | |
| 194 #maintenance_io_concurrency = 10 # 1-1000; 0 disables prefetching | |
| 195 #max_worker_processes = 8 # (change requires restart) | |
| 196 #max_parallel_workers_per_gather = 2 # taken from max_parallel_workers | |
| 197 #max_parallel_maintenance_workers = 2 # taken from max_parallel_workers | |
| 198 #max_parallel_workers = 8 # maximum number of max_worker_processes that | |
| 199 # can be used in parallel operations | |
| 200 #parallel_leader_participation = on | |
| 201 #old_snapshot_threshold = -1 # 1min-60d; -1 disables; 0 is immediate | |
| 202 # (change requires restart) | |
| 203 | |
| 204 | |
| 205 #------------------------------------------------------------------------------ | |
| 206 # WRITE-AHEAD LOG | |
| 207 #------------------------------------------------------------------------------ | |
| 208 | |
| 209 # - Settings - | |
| 210 | |
| 211 #wal_level = replica # minimal, replica, or logical | |
| 212 # (change requires restart) | |
| 213 #fsync = on # flush data to disk for crash safety | |
| 214 # (turning this off can cause | |
| 215 # unrecoverable data corruption) | |
| 216 #synchronous_commit = on # synchronization level; | |
| 217 # off, local, remote_write, remote_apply, or on | |
| 218 #wal_sync_method = fsync # the default is the first option | |
| 219 # supported by the operating system: | |
| 220 # open_datasync | |
| 221 # fdatasync (default on Linux and FreeBSD) | |
| 222 # fsync | |
| 223 # fsync_writethrough | |
| 224 # open_sync | |
| 225 #full_page_writes = on # recover from partial page writes | |
| 226 #wal_log_hints = off # also do full page writes of non-critical updates | |
| 227 # (change requires restart) | |
| 228 #wal_compression = off # enable compression of full-page writes | |
| 229 #wal_init_zero = on # zero-fill new WAL files | |
| 230 #wal_recycle = on # recycle WAL files | |
| 231 #wal_buffers = -1 # min 32kB, -1 sets based on shared_buffers | |
| 232 # (change requires restart) | |
| 233 #wal_writer_delay = 200ms # 1-10000 milliseconds | |
| 234 #wal_writer_flush_after = 1MB # measured in pages, 0 disables | |
| 235 #wal_skip_threshold = 2MB | |
| 236 | |
| 237 #commit_delay = 0 # range 0-100000, in microseconds | |
| 238 #commit_siblings = 5 # range 1-1000 | |
| 239 | |
| 240 # - Checkpoints - | |
| 241 | |
| 242 #checkpoint_timeout = 5min # range 30s-1d | |
| 243 #checkpoint_completion_target = 0.9 # checkpoint target duration, 0.0 - 1.0 | |
| 244 #checkpoint_flush_after = 0 # measured in pages, 0 disables | |
| 245 #checkpoint_warning = 30s # 0 disables | |
| 246 max_wal_size = 1GB | |
| 247 min_wal_size = 80MB | |
| 248 | |
| 249 # - Archiving - | |
| 250 | |
| 251 #archive_mode = off # enables archiving; off, on, or always | |
| 252 # (change requires restart) | |
| 253 #archive_command = '' # command to use to archive a logfile segment | |
| 254 # placeholders: %p = path of file to archive | |
| 255 # %f = file name only | |
| 256 # e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f' | |
| 257 #archive_timeout = 0 # force a logfile segment switch after this | |
| 258 # number of seconds; 0 disables | |
| 259 | |
| 260 # - Archive Recovery - | |
| 261 | |
| 262 # These are only used in recovery mode. | |
| 263 | |
| 264 #restore_command = '' # command to use to restore an archived logfile segment | |
| 265 # placeholders: %p = path of file to restore | |
| 266 # %f = file name only | |
| 267 # e.g. 'cp /mnt/server/archivedir/%f %p' | |
| 268 #archive_cleanup_command = '' # command to execute at every restartpoint | |
| 269 #recovery_end_command = '' # command to execute at completion of recovery | |
| 270 | |
| 271 # - Recovery Target - | |
| 272 | |
| 273 # Set these only when performing a targeted recovery. | |
| 274 | |
| 275 #recovery_target = '' # 'immediate' to end recovery as soon as a | |
| 276 # consistent state is reached | |
| 277 # (change requires restart) | |
| 278 #recovery_target_name = '' # the named restore point to which recovery will proceed | |
| 279 # (change requires restart) | |
| 280 #recovery_target_time = '' # the time stamp up to which recovery will proceed | |
| 281 # (change requires restart) | |
| 282 #recovery_target_xid = '' # the transaction ID up to which recovery will proceed | |
| 283 # (change requires restart) | |
| 284 #recovery_target_lsn = '' # the WAL LSN up to which recovery will proceed | |
| 285 # (change requires restart) | |
| 286 #recovery_target_inclusive = on # Specifies whether to stop: | |
| 287 # just after the specified recovery target (on) | |
| 288 # just before the recovery target (off) | |
| 289 # (change requires restart) | |
| 290 #recovery_target_timeline = 'latest' # 'current', 'latest', or timeline ID | |
| 291 # (change requires restart) | |
| 292 #recovery_target_action = 'pause' # 'pause', 'promote', 'shutdown' | |
| 293 # (change requires restart) | |
| 294 | |
| 295 | |
| 296 #------------------------------------------------------------------------------ | |
| 297 # REPLICATION | |
| 298 #------------------------------------------------------------------------------ | |
| 299 | |
| 300 # - Sending Servers - | |
| 301 | |
| 302 # Set these on the primary and on any standby that will send replication data. | |
| 303 | |
| 304 #max_wal_senders = 10 # max number of walsender processes | |
| 305 # (change requires restart) | |
| 306 #max_replication_slots = 10 # max number of replication slots | |
| 307 # (change requires restart) | |
| 308 #wal_keep_size = 0 # in megabytes; 0 disables | |
| 309 #max_slot_wal_keep_size = -1 # in megabytes; -1 disables | |
| 310 #wal_sender_timeout = 60s # in milliseconds; 0 disables | |
| 311 #track_commit_timestamp = off # collect timestamp of transaction commit | |
| 312 # (change requires restart) | |
| 313 | |
| 314 # - Primary Server - | |
| 315 | |
| 316 # These settings are ignored on a standby server. | |
| 317 | |
| 318 #synchronous_standby_names = '' # standby servers that provide sync rep | |
| 319 # method to choose sync standbys, number of sync standbys, | |
| 320 # and comma-separated list of application_name | |
| 321 # from standby(s); '*' = all | |
| 322 #vacuum_defer_cleanup_age = 0 # number of xacts by which cleanup is delayed | |
| 323 | |
| 324 # - Standby Servers - | |
| 325 | |
| 326 # These settings are ignored on a primary server. | |
| 327 | |
| 328 #primary_conninfo = '' # connection string to sending server | |
| 329 #primary_slot_name = '' # replication slot on sending server | |
| 330 #promote_trigger_file = '' # file name whose presence ends recovery | |
| 331 #hot_standby = on # "off" disallows queries during recovery | |
| 332 # (change requires restart) | |
| 333 #max_standby_archive_delay = 30s # max delay before canceling queries | |
| 334 # when reading WAL from archive; | |
| 335 # -1 allows indefinite delay | |
| 336 #max_standby_streaming_delay = 30s # max delay before canceling queries | |
| 337 # when reading streaming WAL; | |
| 338 # -1 allows indefinite delay | |
| 339 #wal_receiver_create_temp_slot = off # create temp slot if primary_slot_name | |
| 340 # is not set | |
| 341 #wal_receiver_status_interval = 10s # send replies at least this often | |
| 342 # 0 disables | |
| 343 #hot_standby_feedback = off # send info from standby to prevent | |
| 344 # query conflicts | |
| 345 #wal_receiver_timeout = 60s # time that receiver waits for | |
| 346 # communication from primary | |
| 347 # in milliseconds; 0 disables | |
| 348 #wal_retrieve_retry_interval = 5s # time to wait before retrying to | |
| 349 # retrieve WAL after a failed attempt | |
| 350 #recovery_min_apply_delay = 0 # minimum delay for applying changes during recovery | |
| 351 | |
| 352 # - Subscribers - | |
| 353 | |
| 354 # These settings are ignored on a publisher. | |
| 355 | |
| 356 #max_logical_replication_workers = 4 # taken from max_worker_processes | |
| 357 # (change requires restart) | |
| 358 #max_sync_workers_per_subscription = 2 # taken from max_logical_replication_workers | |
| 359 | |
| 360 | |
| 361 #------------------------------------------------------------------------------ | |
| 362 # QUERY TUNING | |
| 363 #------------------------------------------------------------------------------ | |
| 364 | |
| 365 # - Planner Method Configuration - | |
| 366 | |
| 367 #enable_async_append = on | |
| 368 #enable_bitmapscan = on | |
| 369 #enable_gathermerge = on | |
| 370 #enable_hashagg = on | |
| 371 #enable_hashjoin = on | |
| 372 #enable_incremental_sort = on | |
| 373 #enable_indexscan = on | |
| 374 #enable_indexonlyscan = on | |
| 375 #enable_material = on | |
| 376 #enable_memoize = on | |
| 377 #enable_mergejoin = on | |
| 378 #enable_nestloop = on | |
| 379 #enable_parallel_append = on | |
| 380 #enable_parallel_hash = on | |
| 381 #enable_partition_pruning = on | |
| 382 #enable_partitionwise_join = off | |
| 383 #enable_partitionwise_aggregate = off | |
| 384 #enable_seqscan = on | |
| 385 #enable_sort = on | |
| 386 #enable_tidscan = on | |
| 387 | |
| 388 # - Planner Cost Constants - | |
| 389 | |
| 390 #seq_page_cost = 1.0 # measured on an arbitrary scale | |
| 391 #random_page_cost = 4.0 # same scale as above | |
| 392 #cpu_tuple_cost = 0.01 # same scale as above | |
| 393 #cpu_index_tuple_cost = 0.005 # same scale as above | |
| 394 #cpu_operator_cost = 0.0025 # same scale as above | |
| 395 #parallel_setup_cost = 1000.0 # same scale as above | |
| 396 #parallel_tuple_cost = 0.1 # same scale as above | |
| 397 #min_parallel_table_scan_size = 8MB | |
| 398 #min_parallel_index_scan_size = 512kB | |
| 399 #effective_cache_size = 4GB | |
| 400 | |
| 401 #jit_above_cost = 100000 # perform JIT compilation if available | |
| 402 # and query more expensive than this; | |
| 403 # -1 disables | |
| 404 #jit_inline_above_cost = 500000 # inline small functions if query is | |
| 405 # more expensive than this; -1 disables | |
| 406 #jit_optimize_above_cost = 500000 # use expensive JIT optimizations if | |
| 407 # query is more expensive than this; | |
| 408 # -1 disables | |
| 409 | |
| 410 # - Genetic Query Optimizer - | |
| 411 | |
| 412 #geqo = on | |
| 413 #geqo_threshold = 12 | |
| 414 #geqo_effort = 5 # range 1-10 | |
| 415 #geqo_pool_size = 0 # selects default based on effort | |
| 416 #geqo_generations = 0 # selects default based on effort | |
| 417 #geqo_selection_bias = 2.0 # range 1.5-2.0 | |
| 418 #geqo_seed = 0.0 # range 0.0-1.0 | |
| 419 | |
| 420 # - Other Planner Options - | |
| 421 | |
| 422 #default_statistics_target = 100 # range 1-10000 | |
| 423 #constraint_exclusion = partition # on, off, or partition | |
| 424 #cursor_tuple_fraction = 0.1 # range 0.0-1.0 | |
| 425 #from_collapse_limit = 8 | |
| 426 #jit = on # allow JIT compilation | |
| 427 #join_collapse_limit = 8 # 1 disables collapsing of explicit | |
| 428 # JOIN clauses | |
| 429 #plan_cache_mode = auto # auto, force_generic_plan or | |
| 430 # force_custom_plan | |
| 431 | |
| 432 | |
| 433 #------------------------------------------------------------------------------ | |
| 434 # REPORTING AND LOGGING | |
| 435 #------------------------------------------------------------------------------ | |
| 436 | |
| 437 # - Where to Log - | |
| 438 | |
| 439 log_destination = 'syslog' | |
| 440 #log_destination = 'stderr' # Valid values are combinations of | |
| 441 # stderr, csvlog, syslog, and eventlog, | |
| 442 # depending on platform. csvlog | |
| 443 # requires logging_collector to be on. | |
| 444 | |
| 445 # This is used when logging to stderr: | |
| 446 #logging_collector = off # Enable capturing of stderr and csvlog | |
| 447 # into log files. Required to be on for | |
| 448 # csvlogs. | |
| 449 # (change requires restart) | |
| 450 | |
| 451 # These are only used if logging_collector is on: | |
| 452 #log_directory = 'log' # directory where log files are written, | |
| 453 # can be absolute or relative to PGDATA | |
| 454 #log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log' # log file name pattern, | |
| 455 # can include strftime() escapes | |
| 456 #log_file_mode = 0600 # creation mode for log files, | |
| 457 # begin with 0 to use octal notation | |
| 458 #log_rotation_age = 1d # Automatic rotation of logfiles will | |
| 459 # happen after that time. 0 disables. | |
| 460 #log_rotation_size = 10MB # Automatic rotation of logfiles will | |
| 461 # happen after that much log output. | |
| 462 # 0 disables. | |
| 463 #log_truncate_on_rotation = off # If on, an existing log file with the | |
| 464 # same name as the new log file will be | |
| 465 # truncated rather than appended to. | |
| 466 # But such truncation only occurs on | |
| 467 # time-driven rotation, not on restarts | |
| 468 # or size-driven rotation. Default is | |
| 469 # off, meaning append to existing files | |
| 470 # in all cases. | |
| 471 | |
| 472 # These are relevant when logging to syslog: | |
| 473 #syslog_facility = 'LOCAL0' | |
| 474 #syslog_ident = 'postgres' | |
| 475 #syslog_sequence_numbers = on | |
| 476 #syslog_split_messages = on | |
| 477 | |
| 478 # This is only relevant when logging to eventlog (Windows): | |
| 479 # (change requires restart) | |
| 480 #event_source = 'PostgreSQL' | |
| 481 | |
| 482 # - When to Log - | |
| 483 | |
| 484 #log_min_messages = warning # values in order of decreasing detail: | |
| 485 # debug5 | |
| 486 # debug4 | |
| 487 # debug3 | |
| 488 # debug2 | |
| 489 # debug1 | |
| 490 # info | |
| 491 # notice | |
| 492 # warning | |
| 493 # error | |
| 494 # log | |
| 495 # fatal | |
| 496 # panic | |
| 497 | |
| 498 #log_min_error_statement = error # values in order of decreasing detail: | |
| 499 # debug5 | |
| 500 # debug4 | |
| 501 # debug3 | |
| 502 # debug2 | |
| 503 # debug1 | |
| 504 # info | |
| 505 # notice | |
| 506 # warning | |
| 507 # error | |
| 508 # log | |
| 509 # fatal | |
| 510 # panic (effectively off) | |
| 511 | |
| 512 #log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements | |
| 513 # and their durations, > 0 logs only | |
| 514 # statements running at least this number | |
| 515 # of milliseconds | |
| 516 | |
| 517 #log_min_duration_sample = -1 # -1 is disabled, 0 logs a sample of statements | |
| 518 # and their durations, > 0 logs only a sample of | |
| 519 # statements running at least this number | |
| 520 # of milliseconds; | |
| 521 # sample fraction is determined by log_statement_sample_rate | |
| 522 | |
| 523 #log_statement_sample_rate = 1.0 # fraction of logged statements exceeding | |
| 524 # log_min_duration_sample to be logged; | |
| 525 # 1.0 logs all such statements, 0.0 never logs | |
| 526 | |
| 527 | |
| 528 #log_transaction_sample_rate = 0.0 # fraction of transactions whose statements | |
| 529 # are logged regardless of their duration; 1.0 logs all | |
| 530 # statements from all transactions, 0.0 never logs | |
| 531 | |
| 532 # - What to Log - | |
| 533 | |
| 534 #debug_print_parse = off | |
| 535 #debug_print_rewritten = off | |
| 536 #debug_print_plan = off | |
| 537 #debug_pretty_print = on | |
| 538 #log_autovacuum_min_duration = -1 # log autovacuum activity; | |
| 539 # -1 disables, 0 logs all actions and | |
| 540 # their durations, > 0 logs only | |
| 541 # actions running at least this number | |
| 542 # of milliseconds. | |
| 543 #log_checkpoints = off | |
| 544 #log_connections = off | |
| 545 #log_disconnections = off | |
| 546 #log_duration = off | |
| 547 #log_error_verbosity = default # terse, default, or verbose messages | |
| 548 #log_hostname = off | |
| 549 #log_line_prefix = '%m [%p] ' # special values: | |
| 550 # %a = application name | |
| 551 # %u = user name | |
| 552 # %d = database name | |
| 553 # %r = remote host and port | |
| 554 # %h = remote host | |
| 555 # %b = backend type | |
| 556 # %p = process ID | |
| 557 # %P = process ID of parallel group leader | |
| 558 # %t = timestamp without milliseconds | |
| 559 # %m = timestamp with milliseconds | |
| 560 # %n = timestamp with milliseconds (as a Unix epoch) | |
| 561 # %Q = query ID (0 if none or not computed) | |
| 562 # %i = command tag | |
| 563 # %e = SQL state | |
| 564 # %c = session ID | |
| 565 # %l = session line number | |
| 566 # %s = session start timestamp | |
| 567 # %v = virtual transaction ID | |
| 568 # %x = transaction ID (0 if none) | |
| 569 # %q = stop here in non-session | |
| 570 # processes | |
| 571 # %% = '%' | |
| 572 # e.g. '<%u%%%d> ' | |
| 573 #log_lock_waits = off # log lock waits >= deadlock_timeout | |
| 574 #log_recovery_conflict_waits = off # log standby recovery conflict waits | |
| 575 # >= deadlock_timeout | |
| 576 #log_parameter_max_length = -1 # when logging statements, limit logged | |
| 577 # bind-parameter values to N bytes; | |
| 578 # -1 means print in full, 0 disables | |
| 579 #log_parameter_max_length_on_error = 0 # when logging an error, limit logged | |
| 580 # bind-parameter values to N bytes; | |
| 581 # -1 means print in full, 0 disables | |
| 582 #log_statement = 'none' # none, ddl, mod, all | |
| 583 #log_replication_commands = off | |
| 584 #log_temp_files = -1 # log temporary files equal or larger | |
| 585 # than the specified size in kilobytes; | |
| 586 # -1 disables, 0 logs all temp files | |
| 587 log_timezone = 'Europe/Berlin' | |
| 588 | |
| 589 | |
| 590 #------------------------------------------------------------------------------ | |
| 591 # PROCESS TITLE | |
| 592 #------------------------------------------------------------------------------ | |
| 593 | |
| 594 #cluster_name = '' # added to process titles if nonempty | |
| 595 # (change requires restart) | |
| 596 | |
| 597 # On FreeBSD, this is a performance hog, so keep it off if you need speed | |
| 598 update_process_title = off | |
| 599 | |
| 600 | |
| 601 #------------------------------------------------------------------------------ | |
| 602 # STATISTICS | |
| 603 #------------------------------------------------------------------------------ | |
| 604 | |
| 605 # - Query and Index Statistics Collector - | |
| 606 | |
| 607 #track_activities = on | |
| 608 #track_activity_query_size = 1024 # (change requires restart) | |
| 609 #track_counts = on | |
| 610 #track_io_timing = off | |
| 611 #track_wal_io_timing = off | |
| 612 #track_functions = none # none, pl, all | |
| 613 #stats_temp_directory = 'pg_stat_tmp' | |
| 614 | |
| 615 | |
| 616 # - Monitoring - | |
| 617 | |
| 618 #compute_query_id = auto | |
| 619 #log_statement_stats = off | |
| 620 #log_parser_stats = off | |
| 621 #log_planner_stats = off | |
| 622 #log_executor_stats = off | |
| 623 | |
| 624 | |
| 625 #------------------------------------------------------------------------------ | |
| 626 # AUTOVACUUM | |
| 627 #------------------------------------------------------------------------------ | |
| 628 | |
| 629 #autovacuum = on # Enable autovacuum subprocess? 'on' | |
| 630 # requires track_counts to also be on. | |
| 631 #autovacuum_max_workers = 3 # max number of autovacuum subprocesses | |
| 632 # (change requires restart) | |
| 633 #autovacuum_naptime = 1min # time between autovacuum runs | |
| 634 #autovacuum_vacuum_threshold = 50 # min number of row updates before | |
| 635 # vacuum | |
| 636 #autovacuum_vacuum_insert_threshold = 1000 # min number of row inserts | |
| 637 # before vacuum; -1 disables insert | |
| 638 # vacuums | |
| 639 #autovacuum_analyze_threshold = 50 # min number of row updates before | |
| 640 # analyze | |
| 641 #autovacuum_vacuum_scale_factor = 0.2 # fraction of table size before vacuum | |
| 642 #autovacuum_vacuum_insert_scale_factor = 0.2 # fraction of inserts over table | |
| 643 # size before insert vacuum | |
| 644 #autovacuum_analyze_scale_factor = 0.1 # fraction of table size before analyze | |
| 645 #autovacuum_freeze_max_age = 200000000 # maximum XID age before forced vacuum | |
| 646 # (change requires restart) | |
| 647 #autovacuum_multixact_freeze_max_age = 400000000 # maximum multixact age | |
| 648 # before forced vacuum | |
| 649 # (change requires restart) | |
| 650 #autovacuum_vacuum_cost_delay = 2ms # default vacuum cost delay for | |
| 651 # autovacuum, in milliseconds; | |
| 652 # -1 means use vacuum_cost_delay | |
| 653 #autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for | |
| 654 # autovacuum, -1 means use | |
| 655 # vacuum_cost_limit | |
| 656 | |
| 657 | |
| 658 #------------------------------------------------------------------------------ | |
| 659 # CLIENT CONNECTION DEFAULTS | |
| 660 #------------------------------------------------------------------------------ | |
| 661 | |
| 662 # - Statement Behavior - | |
| 663 | |
| 664 #client_min_messages = notice # values in order of decreasing detail: | |
| 665 # debug5 | |
| 666 # debug4 | |
| 667 # debug3 | |
| 668 # debug2 | |
| 669 # debug1 | |
| 670 # log | |
| 671 # notice | |
| 672 # warning | |
| 673 # error | |
| 674 #search_path = '"$user", public' # schema names | |
| 675 #row_security = on | |
| 676 #default_table_access_method = 'heap' | |
| 677 #default_tablespace = '' # a tablespace name, '' uses the default | |
| 678 #default_toast_compression = 'pglz' # 'pglz' or 'lz4' | |
| 679 #temp_tablespaces = '' # a list of tablespace names, '' uses | |
| 680 # only default tablespace | |
| 681 #check_function_bodies = on | |
| 682 #default_transaction_isolation = 'read committed' | |
| 683 #default_transaction_read_only = off | |
| 684 #default_transaction_deferrable = off | |
| 685 #session_replication_role = 'origin' | |
| 686 #statement_timeout = 0 # in milliseconds, 0 is disabled | |
| 687 #lock_timeout = 0 # in milliseconds, 0 is disabled | |
| 688 #idle_in_transaction_session_timeout = 0 # in milliseconds, 0 is disabled | |
| 689 #idle_session_timeout = 0 # in milliseconds, 0 is disabled | |
| 690 #vacuum_freeze_table_age = 150000000 | |
| 691 #vacuum_freeze_min_age = 50000000 | |
| 692 #vacuum_failsafe_age = 1600000000 | |
| 693 #vacuum_multixact_freeze_table_age = 150000000 | |
| 694 #vacuum_multixact_freeze_min_age = 5000000 | |
| 695 #vacuum_multixact_failsafe_age = 1600000000 | |
| 696 #bytea_output = 'hex' # hex, escape | |
| 697 #xmlbinary = 'base64' | |
| 698 #xmloption = 'content' | |
| 699 #gin_pending_list_limit = 4MB | |
| 700 | |
| 701 # - Locale and Formatting - | |
| 702 | |
| 703 datestyle = 'iso, dmy' | |
| 704 #intervalstyle = 'postgres' | |
| 705 timezone = 'Europe/Berlin' | |
| 706 #timezone_abbreviations = 'Default' # Select the set of available time zone | |
| 707 # abbreviations. Currently, there are | |
| 708 # Default | |
| 709 # Australia (historical usage) | |
| 710 # India | |
| 711 # You can create your own file in | |
| 712 # share/timezonesets/. | |
| 713 #extra_float_digits = 1 # min -15, max 3; any value >0 actually | |
| 714 # selects precise output mode | |
| 715 #client_encoding = sql_ascii # actually, defaults to database | |
| 716 # encoding | |
| 717 | |
| 718 # These settings are initialized by initdb, but they can be changed. | |
| 719 lc_messages = 'de_DE.UTF-8' # locale for system error message | |
| 720 # strings | |
| 721 lc_monetary = 'de_DE.UTF-8' # locale for monetary formatting | |
| 722 lc_numeric = 'de_DE.UTF-8' # locale for number formatting | |
| 723 lc_time = 'de_DE.UTF-8' # locale for time formatting | |
| 724 | |
| 725 # default configuration for text search | |
| 726 default_text_search_config = 'pg_catalog.german' | |
| 727 | |
| 728 # - Shared Library Preloading - | |
| 729 | |
| 730 #local_preload_libraries = '' | |
| 731 #session_preload_libraries = '' | |
| 732 #shared_preload_libraries = '' # (change requires restart) | |
| 733 #jit_provider = 'llvmjit' # JIT library to use | |
| 734 | |
| 735 # - Other Defaults - | |
| 736 | |
| 737 #dynamic_library_path = '$libdir' | |
| 738 #gin_fuzzy_search_limit = 0 | |
| 739 | |
| 740 | |
| 741 #------------------------------------------------------------------------------ | |
| 742 # LOCK MANAGEMENT | |
| 743 #------------------------------------------------------------------------------ | |
| 744 | |
| 745 #deadlock_timeout = 1s | |
| 746 #max_locks_per_transaction = 64 # min 10 | |
| 747 # (change requires restart) | |
| 748 #max_pred_locks_per_transaction = 64 # min 10 | |
| 749 # (change requires restart) | |
| 750 #max_pred_locks_per_relation = -2 # negative values mean | |
| 751 # (max_pred_locks_per_transaction | |
| 752 # / -max_pred_locks_per_relation) - 1 | |
| 753 #max_pred_locks_per_page = 2 # min 0 | |
| 754 | |
| 755 | |
| 756 #------------------------------------------------------------------------------ | |
| 757 # VERSION AND PLATFORM COMPATIBILITY | |
| 758 #------------------------------------------------------------------------------ | |
| 759 | |
| 760 # - Previous PostgreSQL Versions - | |
| 761 | |
| 762 #array_nulls = on | |
| 763 #backslash_quote = safe_encoding # on, off, or safe_encoding | |
| 764 #escape_string_warning = on | |
| 765 #lo_compat_privileges = off | |
| 766 #quote_all_identifiers = off | |
| 767 #standard_conforming_strings = on | |
| 768 #synchronize_seqscans = on | |
| 769 | |
| 770 # - Other Platforms and Clients - | |
| 771 | |
| 772 #transform_null_equals = off | |
| 773 | |
| 774 | |
| 775 #------------------------------------------------------------------------------ | |
| 776 # ERROR HANDLING | |
| 777 #------------------------------------------------------------------------------ | |
| 778 | |
| 779 #exit_on_error = off # terminate session on any error? | |
| 780 #restart_after_crash = on # reinitialize after backend crash? | |
| 781 #data_sync_retry = off # retry or panic on failure to fsync | |
| 782 # data? | |
| 783 # (change requires restart) | |
| 784 #recovery_init_sync_method = fsync # fsync, syncfs (Linux 5.8+) | |
| 785 | |
| 786 | |
| 787 #------------------------------------------------------------------------------ | |
| 788 # CONFIG FILE INCLUDES | |
| 789 #------------------------------------------------------------------------------ | |
| 790 | |
| 791 # These options allow settings to be loaded from files other than the | |
| 792 # default postgresql.conf. Note that these are directives, not variable | |
| 793 # assignments, so they can usefully be given more than once. | |
| 794 | |
| 795 #include_dir = '...' # include files ending in '.conf' from | |
| 796 # a directory, e.g., 'conf.d' | |
| 797 #include_if_exists = '...' # include file only if it exists | |
| 798 #include = '...' # include file | |
| 799 | |
| 800 | |
| 801 #------------------------------------------------------------------------------ | |
| 802 # CUSTOMIZED OPTIONS | |
| 803 #------------------------------------------------------------------------------ | |
| 804 | |
| 805 # Add settings for extensions here |
