tip/test/bin-test/test-dav-sync-hashing-cfgchange.sh

#!/bin/sh
#
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
#
# Copyright 2019 Olaf Wintermann. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
#   1. Redistributions of source code must retain the above copyright
#      notice, this list of conditions and the following disclaimer.
#
#   2. Redistributions in binary form must reproduce the above copyright
#      notice, this list of conditions and the following disclaimer in the
#      documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#

if [ -z "$DAV_BIN" ];
then
	echo "DAV_BIN variable not set"
	exit 1
fi
if [ -z "$DAV_SYNC_BIN" ];
then
	echo "DAV_BIN variable not set"
	exit 1
fi

# checks if tmp-sync/out.txt contains a specific text
# arg1: pattern
# arg2: errormsg
check_tmpout()
{
	TEST=`cat tmp-sync/out.txt | grep "$1"`
	if [ $? -ne 0 ];
	then
		echo "$2"
		exit 2	
	fi
}

# do dav-sync push and check return value
# arg1: dir
# arg2: errormsg
dav_sync_push()
{
	$DAV_SYNC_BIN push $1 > tmp-sync/out.txt
	if [ $? -ne 0 ];
	then
		echo "$2"
		exit 2
	fi
}
# do dav-sync pull and check return value
# arg1: dir
# arg2: errormsg
dav_sync_pull()
{
	$DAV_SYNC_BIN pull $1 > tmp-sync/out.txt
	if [ $? -ne 0 ];
	then
		echo "$2"
		exit 2
	fi
}

rm -f .dav/dav-sync-tests-test3a-db.xml
rm -f .dav/dav-sync-tests-test3b-db.xml

$DAV_BIN rm dav-test-repo/sync/test3 2> /dev/null

$DAV_BIN mkcol dav-test-repo/sync/test3 2> /dev/null

# tmp sync dir
rm -Rf tmp-sync
mkdir tmp-sync
mkdir tmp-sync/test3a
mkdir tmp-sync/test3b

# ----------------------------------------------------------------------------
# 1. test: add 4 files, push, pull
# expected result: 4 files pushed, 4 files pulled

mkdir tmp-sync/test3a/dir1/
mkdir tmp-sync/test3a/dir1/subdir1/

cp synctest/file1 tmp-sync/test3a/
cp synctest/file2 tmp-sync/test3a/dir1/
cp synctest/file3 tmp-sync/test3a/dir1/subdir1
cp synctest/file4 tmp-sync/test3a/dir1/subdir1

dav_sync_push test3a "test 1: push failed"
check_tmpout "4 files pushed" "test 1: wrong push counter"
check_tmpout "0 conflicts" "test 1: wrong conflict counter (push)"
check_tmpout "0 errors" "test 1: wrong error counter (push)"

dav_sync_pull test3b "test 1: pull failed"
check_tmpout "4 files pulled" "test 1: wrong pull counter"
check_tmpout "0 conflicts" "test 1: wrong conflict counter (pull)"
check_tmpout "0 errors" "test 1: wrong error counter (pull)"

# ----------------------------------------------------------------------------
# 2. test: add 4 more files to test3b, push, pull
# expected result: 4 files pushed, 4 files pulled

echo "newfile1" > tmp-sync/test3b/new1
echo "newfile2" > tmp-sync/test3b/new2
echo "newfile3" > tmp-sync/test3b/dir1/new3
echo "newfile4" > tmp-sync/test3b/dir1/new4

dav_sync_push test3b "test 2: push failed"
check_tmpout "4 files pushed" "test 2: wrong push counter"
check_tmpout "0 conflicts" "test 2: wrong conflict counter (push)"
check_tmpout "0 errors" "test 2: wrong error counter (push)"

dav_sync_pull test3a "test 2: pull failed"
check_tmpout "4 files pulled" "test 2: wrong pull counter"
check_tmpout "0 conflicts" "test 2: wrong conflict counter (pull)"
check_tmpout "0 errors" "test 2: wrong error counter (pull)"

# ----------------------------------------------------------------------------
# 3. test: enable hashing (by using syncdirs with h suffix), touch file1
#          and modify file2, push, pull
# expected result: 2 files pushed, 1 files pulled

sleep 2

touch tmp-sync/test3a/file1
echo "test3-mod1" >> tmp-sync/test3a/dir1/file2

# should push 2 files, because the db doesn't contain any hashes yet
dav_sync_push test3ah "test 3: push failed"
check_tmpout "2 files pushed" "test 3: wrong push counter"
check_tmpout "0 conflicts" "test 3: wrong conflict counter (push)"
check_tmpout "0 errors" "test 3: wrong error counter (push)"

dav_sync_pull test3bh "test 3: pull failed"
check_tmpout "1 file pulled" "test 3: wrong pull counter"
check_tmpout "0 conflicts" "test 3: wrong conflict counter (pull)"
check_tmpout "0 errors" "test 3: wrong error counter (pull)"

# ----------------------------------------------------------------------------
# 4. test: same as test 3, but the db should contain hashes
# expected result: 1 file pushed, because the db should contain hashes now

sleep 2

touch tmp-sync/test3a/file1
echo "test4-mod1" >> tmp-sync/test3a/dir1/file2

# should push 2 files, because the db doesn't contain any hashes yet
dav_sync_push test3ah "test 4: push failed"
check_tmpout "1 file pushed" "test 4: wrong push counter"
check_tmpout "0 conflicts" "test 4: wrong conflict counter (push)"
check_tmpout "0 errors" "test 4: wrong error counter (push)"

dav_sync_pull test3bh "test 4: pull failed"
check_tmpout "1 file pulled" "test 4: wrong pull counter"
check_tmpout "0 conflicts" "test 4: wrong conflict counter (pull)"
check_tmpout "0 errors" "test 4: wrong error counter (pull)"

# ----------------------------------------------------------------------------
# 5. test: mod file3 on both sides, mod new1 differently on both sides, push
# expected result: 1 conflict, 0 files pushed

echo "test5-mod1" >> tmp-sync/test3a/dir1/subdir1/file3
echo "test5-mod1" >> tmp-sync/test3b/dir1/subdir1/file3

echo "test5-mod-a" >> tmp-sync/test3a/new1
echo "test5-mod-b" >> tmp-sync/test3b/new1

dav_sync_push test3ah "test 5: push test3ah failed"
check_tmpout "2 files pushed" "test 5: wrong push counter (test3ah)"
check_tmpout "0 conflicts" "test 5: wrong conflict counter (test3ah)"
check_tmpout "0 errors" "test 5: wrong error counter (test3ah)"

dav_sync_push test3bh "test 5: push test3bh failed"
check_tmpout "0 files pushed" "test 5: wrong push counter (test3bh)"
check_tmpout "1 conflict" "test 5: wrong conflict counter (testbh)"
check_tmpout "0 errors" "test 5: wrong error counter (test3bh)"

# ----------------------------------------------------------------------------
# 6. test: cp new1 from test3a to test3b and push test3bh
# expected result: 0 files pushed, 0 conflicts

cp tmp-sync/test3a/new1 tmp-sync/test3b/new1

dav_sync_push test3bh "test 6: push failed"
check_tmpout "0 files pushed" "test 6: wrong push counter"
check_tmpout "0 conflicts" "test 6: wrong conflict counter"
check_tmpout "0 errors" "test 6: wrong error counter"

# ----------------------------------------------------------------------------
# 7. test: pull test3bh
# expected result: 0 files pulled, 0 conflicts

dav_sync_pull test3bh "test 6: pull failed"
check_tmpout "0 files pulled" "test 6: wrong pull counter"
check_tmpout "0 conflicts" "test 6: wrong conflict counter"
check_tmpout "0 errors" "test 6: wrong error counter"