/*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
*
* Copyright 2017 Mike Becker, Olaf Wintermann All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/**
* @file: test.h
*
* UCX Test Framework.
*
* Usage of this test framework:
*
* **** IN HEADER FILE: ****
*
* <pre>
* UCX_TEST(function_name);
* UCX_TEST_SUBROUTINE(subroutine_name, paramlist); // optional
* </pre>
*
* **** IN SOURCE FILE: ****
* <pre>
* UCX_TEST_SUBROUTINE(subroutine_name, paramlist) {
* // tests with UCX_TEST_ASSERT()
* }
*
* UCX_TEST(function_name) {
* // memory allocation and other stuff here
* #UCX_TEST_BEGIN
* // tests with UCX_TEST_ASSERT() and/or
* // calls with UCX_TEST_CALL_SUBROUTINE() here
* #UCX_TEST_END
* // cleanup of memory here
* }
* </pre>
*
* <b>Note:</b> if a test fails, a longjump is performed
* back to the #UCX_TEST_BEGIN macro!
*
* <b>Attention:</b> Do not call own functions within a test, that use
* UCX_TEST_ASSERT() macros and are not defined by using UCX_TEST_SUBROUTINE().
*
*
* @author Mike Becker
* @author Olaf Wintermann
*
*/
#ifndef UCX_21_TEST_H
#define UCX_21_TEST_H
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <setjmp.h>
#ifdef __cplusplus
extern "C" {
#endif
#ifndef __FUNCTION__
/**
* Alias for the <code>__func__</code> preprocessor macro.
* Some compilers use <code>__func__</code> and others use __FUNCTION__.
* We use __FUNCTION__ so we define it for those compilers which use
* <code>__func__</code>.
*/
#define __FUNCTION__ __func__
#endif
/** Type for the UcxTestSuite. */
typedef struct UcxTestSuite UcxTestSuite;
/** Pointer to a test function. */
typedef void(*UcxTest)(UcxTestSuite*,FILE*);
/** Type for the internal list of test cases. */
typedef struct UcxTestList UcxTestList;
/** Structure for the internal list of test cases. */
struct UcxTestList {
/** Test case. */
UcxTest test;
/** Pointer to the next list element. */
UcxTestList *next;
};
/**
* A test suite containing multiple test cases.
*/
struct UcxTestSuite {
/** The number of successful tests after the suite has been run. */
unsigned int success;
/** The number of failed tests after the suite has been run. */
unsigned int failure;
/**
* Internal list of test cases.
* Use ucx_test_register() to add tests to this list.
*/
UcxTestList *tests;
};
/**
* Creates a new test suite.
* @return a new test suite
*/
UcxTestSuite* ucx_test_suite_new();
/**
* Destroys a test suite.
* @param suite the test suite to destroy
*/
void ucx_test_suite_free(UcxTestSuite* suite);
/**
* Registers a test function with the specified test suite.
*
* @param suite the suite, the test function shall be added to
* @param test the test function to register
* @return <code>EXIT_SUCCESS</code> on success or
* <code>EXIT_FAILURE</code> on failure
*/
int ucx_test_register(UcxTestSuite* suite, UcxTest test);
/**
* Runs a test suite and writes the test log to the specified stream.
* @param suite the test suite to run
* @param outstream the stream the log shall be written to
*/
void ucx_test_run(UcxTestSuite* suite, FILE* outstream);
/**
* Macro for a #UcxTest function header.
*
* Use this macro to declare and/or define a #UcxTest function.
*
* @param name the name of the test function
*/
#define UCX_TEST(name) void name(UcxTestSuite* _suite_,FILE *_output_)
/**
* Marks the begin of a test.
* <b>Note:</b> Any UCX_TEST_ASSERT() calls must be performed <b>after</b>
* #UCX_TEST_BEGIN.
*
* @see #UCX_TEST_END
*/
#define UCX_TEST_BEGIN fwrite("Running ", 1, 8, _output_);\
fwrite(__FUNCTION__, 1, strlen(__FUNCTION__), _output_);\
fwrite("... ", 1, 4, _output_);\
jmp_buf _env_; \
if (!setjmp(_env_)) {
/**
* Checks a test assertion.
* If the assertion is correct, the test carries on. If the assertion is not
* correct, the specified message (terminated by a dot and a line break) is
* written to the test suites output stream.
* @param condition the condition to check
* @param message the message that shall be printed out on failure
*/
#define UCX_TEST_ASSERT(condition,message) if (!(condition)) { \
fwrite(".\n"message, 1, 2+strlen(message), _output_); \
_suite_->failure++; \
longjmp(_env_, 1);\
}
/**
* Macro for a test subroutine function header.
*
* Use this to declare and/or define a subroutine that can be called by using
* UCX_TEST_CALL_SUBROUTINE().
*
* @param name the name of the subroutine
* @param ... the parameter list
*
* @see UCX_TEST_CALL_SUBROUTINE()
*/
#define UCX_TEST_SUBROUTINE(name,...) void name(UcxTestSuite* _suite_,\
FILE *_output_, jmp_buf _env_, __VA_ARGS__)
/**
* Macro for calling a test subroutine.
*
* Subroutines declared with UCX_TEST_SUBROUTINE() can be called by using this
* macro.
*
* <b>Note:</b> You may <b>only</b> call subroutines within a #UCX_TEST_BEGIN-
* #UCX_TEST_END-block.
*
* @param name the name of the subroutine
* @param ... the argument list
*
* @see UCX_TEST_SUBROUTINE()
*/
#define UCX_TEST_CALL_SUBROUTINE(name,...) \
name(_suite_,_output_,_env_,__VA_ARGS__);
/**
* Marks the end of a test.
* <b>Note:</b> Any UCX_TEST_ASSERT() calls must be performed <b>before</b>
* #UCX_TEST_END.
*
* @see #UCX_TEST_BEGIN
*/
#define UCX_TEST_END fwrite("success.\n", 1, 9, _output_); _suite_->success++;}
#ifdef __cplusplus
}
#endif
#endif /* UCX_21_TEST_H */